PDF Datasheet
Drivlugs
PART NO. CODE NO. DESCRIPTION APPLICATION APPROX. WEIGHT (KG) INFO REQUEST
140-CST 51920 19mm - 10 NC threaded Drivlug Use with SB-25, SB-30 screw bits 0.4
140-CS 51930 Weld-on Drivlug 0.3
140-S 51940 Weld-on Drivlug-short 0.2
141-M 51950 Weld-on Drivlug-short Use with SB-35, SB-40 screw bits and P-35 pilots 0.4
141-MT 51960 31.7mm - 7 NC threaded Drivlug 0.6
MF-MM 51920 Pilot extension For lengthening P-35,
SB-35, SB-45		 0.9
Weld Type Drivlugs
PART NO. CODE NO. APPROX. WEIGHT (KG) USED ON INFO REQUEST
140-S 151940 0.2 SB-25 or SB-30
140-M 151950 0.4 SB-35 or SB-45
141-L 151970 0.65 SB-50 to SB-100
375-TCH-171 to 95-TCH-171
Drivlug with Shank
SHANK CONNECTOR (MM) PART NO. CODE NO. APPROX.
WEIGHT (KG)		 USED ON INFO REQUEST
21 hex SHX-140-S 151980 0.3 SB-25 or SB-30
29 hex MHX-141-S 151990 0.5
29 hex MHX-141-M 152000 0.7 SB-35 or SB-45
41 hex LHX-141-M 152020 1.4
29 hex MHX-141-L 152010 1.0 SB-50 to SB-100
375-TCH-171 to 95-TCH-171
41 hex LHX-141-L 152030 1.7
Drive Pins
AUGER DIAMETER (MM) PART NO. CODE NO. DIMENSIONS (DIAMETER / LENGTH) TO FIT SHANK & SOCKET SIZE (MM) APPROX. WEIGHT (KG) INFO REQUEST
51 DP-2 157779 9.5mm / 46mm 21 hex 0.04
76 DP-3 157780 12.7mm / 57mm 29 hex 0.09
102 DP-4 157781 15.8mm / 76mm 41 hex 0.14
114
140
162 DP-5 157782 15.8mm / 108mm 41 hex 0.18
187
200
225
267
Screw Bits - Carbide Drill Heads - Drivlugs & Drive Pins - Alt. Pilot Bits & Adapters - MD Boring Heads & Shank Plates